Amazing build quality. The light feels and acts like a piece of equipment, not just a light."
FIND WHAT FITS:
Ford Powerstroke 7.3 Diesel - F250/F350 Battery Cable Kit (1999-2003)
Regular price
$355.50
SKU: FORD-9903-2/0G-7.3DIESEL_90DEG
(NOTE: Some trucks will have a 90* connection at the starter, some will have a straight connection. Be sure to verify which your truck has.)
This upgraded battery cable kit replaces old/worn out battery cables in your Ford Powerstroke 7.3 Diesel F250/F350 for more power, better performance, and faster starts from your vehicle. Let's just say that when the factory made your original cables, they didn't make them to last.... and ours will likely outlast your truck!
Why do I need your cables?
You know how when it gets colder, it takes longer to get going? The issue is that the cables your truck came with, aren't the cables they started out as. They've got corrosion keeping the full amount of current from reaching the starter... or the previous guy/gal who owned your truck was a hack, leaving you to deal with their sub-par work. All of these things can contribute to issues with your electrical system.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation toyota Tacoma Big 7 Battery Cable Kit.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
These aren't just any old diesel "big 3" cables, these are the "Big 7" from JeepCables!
Kit Includes:
B- to Fender Grounds (4GA)
B- to Engine Block Grounds (2/0)
B- to Frame Grounds (4GA)
B+ to Solenoid (2GA)
B+ to Starter (2/0)
B+ Crossover Cable (2/0)
Starter to Starter Relay (10GA)
2 sets of military-style battery terminals
(NOTE: Some trucks will have a 90* connection at the starter, some will have a straight connection. Be sure to verify which your truck has.)
This upgraded battery cable kit replaces old/worn out battery cables in your Ford Powerstroke 7.3 Diesel F250/F350 for more power, better performance, and faster starts from your vehicle. Let's just say that when the factory made your original cables, they didn't make them to last.... and ours will likely outlast your truck!
Why do I need your cables?
You know how when it gets colder, it takes longer to get going? The issue is that the cables your truck came with, aren't the cables they started out as. They've got corrosion keeping the full amount of current from reaching the starter... or the previous guy/gal who owned your truck was a hack, leaving you to deal with their sub-par work. All of these things can contribute to issues with your electrical system.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation toyota Tacoma Big 7 Battery Cable Kit.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
These aren't just any old diesel "big 3" cables, these are the "Big 7" from JeepCables!
Kit Includes:
B- to Fender Grounds (4GA)
B- to Engine Block Grounds (2/0)
B- to Frame Grounds (4GA)
B+ to Solenoid (2GA)
B+ to Starter (2/0)
B+ Crossover Cable (2/0)
Starter to Starter Relay (10GA)
2 sets of military-style battery terminals
All TYRI products are shipped in 2-3 business days.
All TYRI products are shipped in 2-3 business days.
Ford Powerstroke 7.3 Diesel - F250/F350 Battery Cable Kit (1999-2003)
Regular price
$355.50
FORD-9903-2/0G-7.3DIESEL_90DEG
(NOTE: Some trucks will have a 90* connection at the starter, some will have a straight connection. Be sure to verify which your truck has.)
This upgraded battery cable kit replaces old/worn out battery cables in your Ford Powerstroke 7.3 Diesel F250/F350 for more power, better performance, and faster starts from your vehicle. Let's just say that when the factory made your original cables, they didn't make them to last.... and ours will likely outlast your truck!
Why do I need your cables?
You know how when it gets colder, it takes longer to get going? The issue is that the cables your truck came with, aren't the cables they started out as. They've got corrosion keeping the full amount of current from reaching the starter... or the previous guy/gal who owned your truck was a hack, leaving you to deal with their sub-par work. All of these things can contribute to issues with your electrical system.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation toyota Tacoma Big 7 Battery Cable Kit.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
These aren't just any old diesel "big 3" cables, these are the "Big 7" from JeepCables!
Kit Includes:
B- to Fender Grounds (4GA)
B- to Engine Block Grounds (2/0)
B- to Frame Grounds (4GA)
B+ to Solenoid (2GA)
B+ to Starter (2/0)
B+ Crossover Cable (2/0)
Starter to Starter Relay (10GA)
2 sets of military-style battery terminals
(NOTE: Some trucks will have a 90* connection at the starter, some will have a straight connection. Be sure to verify which your truck has.)
This upgraded battery cable kit replaces old/worn out battery cables in your Ford Powerstroke 7.3 Diesel F250/F350 for more power, better performance, and faster starts from your vehicle. Let's just say that when the factory made your original cables, they didn't make them to last.... and ours will likely outlast your truck!
Why do I need your cables?
You know how when it gets colder, it takes longer to get going? The issue is that the cables your truck came with, aren't the cables they started out as. They've got corrosion keeping the full amount of current from reaching the starter... or the previous guy/gal who owned your truck was a hack, leaving you to deal with their sub-par work. All of these things can contribute to issues with your electrical system.
What makes these cables so special?
We're nerds for specs and finer details around here. None of that CCA (copper-clad aluminum) that's used in inferior products, or stereo installations. We only use fine-strand, SAE (Society of Automotive Engineers) approved, pure copper cable. Then using a powerful electromechanical crimping machine, we crimp each solid-copper end, and finally finish the construction by adding a environmental seal made of marine grade heatshrink meeting MIL-I-23053/4. Also included are military style corrosion resistant battery connections and an ANL fuse and holder. To make the entire install simpler, every end will be labeled for ease of installation toyota Tacoma Big 7 Battery Cable Kit.
Do I need a bigger alternator to run these cables?
No. Every vehicle can benefit from our "better than factory" cables. The years, along with environmental damage from rain/salt water/corrosion, can greatly impact your electrical system. Our customers have consistently reported that their vehicle starts faster, charges the battery better, and many times cured electrical gremlins that were brought on by compromised wiring.
These aren't just any old diesel "big 3" cables, these are the "Big 7" from JeepCables!
Kit Includes:
B- to Fender Grounds (4GA)
B- to Engine Block Grounds (2/0)
B- to Frame Grounds (4GA)
B+ to Solenoid (2GA)
B+ to Starter (2/0)
B+ Crossover Cable (2/0)
Starter to Starter Relay (10GA)
2 sets of military-style battery terminals
All TYRI products are shipped in 2-3 business days.
All TYRI products are shipped in 2-3 business days.
Tyri has the answer for EVERYTHING!."
These lights gave me piece of mind as soon as I opened the box. WOW.
POWERFUL. TOUGH. RELIABLE.
LIGHT OUTPUT & PATTERNS
Unlike many other light brands on the market, TYRI lights are rated in eLumens - a measurements of ACTUAL light emitted. eLumens help you determine which light is best for how you want to use it. TYRI light patterns are specifically designed for tough off-road use - shining light exactly where you need it.
SHOCK & VIBRATION
TYRI lights undergo shock testing by being mounted to a vibration table and subjected to 50G pulses, then vibrated to alternating frequencies for 24 hours. We test under these conditions in 3 different positions, for 8 continuous hours.
TEMPERATURE EXTREMES
TYRI lights are tested in a climate chamber with temperatures cycling from a frigid -40 degrees F to a blazing 185 degrees - 24 hours a day for 28 continuous days - with humidity up to 90%.
WATER SEALING TESTING
TYRI lights undergo intense pressure washing and immersion testing to ensure they can withstand the harshest weather conditions. Rated to IP 69K.